Load Floor; Driving Position Memory System; Adjusting The Steering Wheel - Honda CR-V 2017 Owner's Manual

VEHICLE CONTROLS

Load Floor

The load floor height is adjustable. Set the floor panel in the lower position for maximum
floor-to-ceiling height, or in the upper position for a flat cargo floor.
1. Remove the cargo area floor panel.
2. Place the front of the panel on the appropriate support.
Lower the rear of the panel into place.
58 |

Driving Position Memory System*

You can use the buttons on the driver's door to store two driver's seat positions into
memory when the vehicle is on.
1. Adjust the seat to your preferred position.
2. Press SET.
3. Press and hold memory button 1 or 2. You will hear two
beeps when the memory is set.
4. Press one of the memory buttons to recall previously
stored positions.
Lumbar positions cannot be stored.
Upper position
When you unlock and open the driver's door with a remote transmitter, the seat adjusts
Lower position
automatically to one of the two preset positions.

Adjusting the Steering Wheel

The steering wheel height and distance from your body can be adjusted so that you can
comfortably grip the steering wheel in an appropriate driving posture.
1. Pull up the steering wheel adjustment lever.
2. Move the steering wheel up or down, and in or out.
3. Push down the steering wheel adjustment lever to lock
the steering wheel in position.
Adjusting the steering wheel position while driving may cause you to lose
control of the vehicle and be seriously injured in a crash.
Adjust the steering wheel only when the vehicle is stopped.
VEHICLE CONTROLS
Memory
Button 1
Memory
Button 2
SET Button
To adjust
To lock
WARNING
*if equipped
Lever
| 59