Philips 170X6 User Manual page 70

Connecting to Your PC
5) Connect to PC
(1) Turn off your computer and unplug its power cable.
(2) Connect the monitor signal cable to the video connector on the back of your
computer.
(3) Plug the power cord of your computer and your monitor into a nearby outlet.
(4) USB plug
(a)
cable.
(b)
(5) Turn on your computer and monitor. If the monitor displays an image, installation is
complete.
Note: The USB plug is a pass through connection whether it can support USB 1.1 or USB 2.0
depends on your PC's specification.
file:///D|/My%20Documents/dfu/X6_model/english/170x6/install/connect.htm (3 of 3)2005-06-27 1:27:43 PM
Connect USB upstream port on monitor and the USB port on PC with a USB
The USB downstream port is now ready for any USB device to plug in
RETURN TO TOP OF THE PAGE