Philips 170x5 User Manual page 41

FAQs (Frequently Asked Questions)
the top to the bottom of the screen determines flicker, an active matrix display uses an
active element (TFT) to control each individual pixel and the refresh rate is therefore not
really applicable to LCD technology.
Q:
Will the LCD screen be resistant to scratches?
A:
A protective coating is applied to the surface of the LCD, which is durable to a certain
extent (approximately up to the hardness of a 2H pencil). In general, it is recommended that
the panel surface is not subject to any excessive shocks or scratches. An optional
protective cover with greater scratch resistance is also available.
Q:
How should I clean the LCD surface?
A:
For normal cleaning, use a clean, soft cloth. For extensive cleaning, please use isopropyl
alcohol. Do not use other solvents such as ethyl alcohol, ethanol, acetone, hexane, etc.
LightFrame
Q:
Can I use previous LightFrame
A:
Your monitor comes with the newest LightFrame
previous software versions.
Q:
Can I use LightFrame
A:
No, LightFrame
It is, however, possible to use the LightFrame
Q:
Can I use LightFrame
A:
No. LightFrame
Q:
What is the difference between LightFrame
file:///D|/My%20Documents/dfu/X_model/english/170x5/safety/saf_faq.htm (3 of 9)2005-04-21 8:36:46 AM
RETURN TO TOP OF THE PAGE
TM
DR
TM
TM
DR software on my LightFrame
TM
1 or 2 or 3 monitors only work with LightFrame
TM
DR for my CRT LightFrame
TM
DR is made specifically for digital LCD monitors
versions 3, 2 or 1 for my new Philips X5-line Monitor?
TM
engine. It is not compatible with
TM
TM
2 software on a LightFrame
TM
monitor?
TM
DR and earlier LightFrame
version 3, 2 or 1 monitor?
TM
1 or 2 or 3 software.
TM
1 monitor.
TM
versions (3, 2