Installation - CEN-TECH 200 watt continuous Owner's Manual & Safety Instructions

Installation

Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the
beginning of this manual including all text under subheadings therein
before set up or use of this product.
CAUTION! This Inverter must only be connected to batteries with an output
voltage of 12 volts DC. Lower voltage will not operate the Inverter properly,
and more voltage could damage the Inverter or the device being powered.
Do not use this Inverter with positive ground electrical systems.
The Inverter is configured to have a number of shut-down points,
for the safety of the operator, the unit, and the devices being used with it.
• If the DC input voltage drops too low,
the alarm on the Inverter will sound.
Should the input voltage drop further,
the Inverter will shut down automatically
to prevent permanent battery damage.
Recharge the battery soon.
• If the DC input voltage exceeds 15.2V
the Inverter will shut down automatically.
Note: Even though this inverter has built-in mechanisms to minimize damage,
the above situations should be avoided because they can still
damage the inverter, battery, and/or attached device(s).
Functions
Fault LED
Power Button
AC Outlets
Item 66967
Power LED
USB Outlet
For technical questions, please call 1-888-866-5797.
• If the output load power rises higher
than the rating power of the Inverter;
the unit may shut down automatically.
• The Inverter may automatically
shut down if its internal
temperature gets too high.
Power Terminal
- 1 of 2
Alligator
Clips
Page 7