Tools Of The Trade - Orion XTR500.4 Owner's Manual

Hide thumbs Also See for XTR500.4:

Owner's manual (102 pages)

Table Of Contents

Table of Contents

Enlarged version

NOTE: Make sure all the equipment in the system is turned off when

making or breaking connections to the input RCAs or speaker termi-

nals . Turn on the system and slowly turn up the volume control only

after double checking all wire connections.

Power for systems with a single amplifier can be supplied by most

automotive electrical systems. Systems with multiple amplifiers may

require a higher capacity battery, alternator or the use of a storage

capacitor. We strongly recommend the use of a Directed Audio

Essentials power capacitor with an extra battery in larger stereo

systems.

Orion amplifiers generate a certain amount of heat as part of normal

operation. Be sure the area around the amplifier is unobstructed to

allow adequate air circulation. Remember, beach blankets, last

week's laundry, school books and homework papers located on top of

the amplifier do not improve air flow and may become damaged.

You must first remove the end caps to mount the amplifier

(mounting holes are within). (1) Remove the screws first, (2) lift the

end cap straight up to detach from unit and then (3) pull away from

the amplifier. Once mounted replace end caps by following this

process in reverse.

Figure 6

OWNER'S MA NUAL- 12