Philips 170T4 User Manual page 73

Connecting to Your PC, TV Antenna, DVD/VCR etc.
Setting up and connecting your monitor/TV
Ensure that the power to the monitor/TV is switched off before the installation.
A) Connecting to PC computer
1. Connect the power cord to the DC IN power connector on the back of the
monitor.
2. Connect the 15-pin D-SUB of the video signal cable to the VGA connector on
the back of the monitor
Note: If you use an Apple Macitosh
adapter to one end of the monitor signal cable.
3. Connect the stereo audio cable to PC AUDIO IN on the back of the monitor and
the other end to AUDIO OUT terminal of the sound card on your PC.
Note: If necessary, please install monitor driver contained on the accompanied
CD. For driver installation, see the Monitor Driver Installation section
Started).
file:///D|/My%20documents/dfu/B2C_TV_NAFTA/ENGLISH/170T4/install/connect.htm (3 of 8)6/30/2004 11:37:36 AM
TM
, you need to connect the special Mac
(Getting