Philips 170T4 User Manual page 41

FAQs (Frequently Asked Questions)
A:
These are the driver files for your monitor. Follow the instructions in your user manual to
install the drivers. The computer may ask you for monitor drivers (.inf and .icm files) or a
driver disk when you first install your monitor. Follow the instructions to insert the driver
disk (either floppy or CD-ROM) included in this package. Monitor drivers (.inf and .icm files)
will be installed automatically.
Q:
How do I adjust the resolution?
A:
Your video card/graphic driver and monitor together determine the available resolutions.
You can select the desired resolution under Windows® 95/98 Me & 2000/XP with the 'Display
properties/Settings' control panel.
Q:
What if I get lost when I am making monitor adjustments?
A:
Simply press the OSD button, then select 'Reset' to recall all of the original factory
settings.
Q:
My Monitor has no power (Power LED does not light up). What should I do?
A:
Make sure the power cord is connected to the Monitor.
Q:
Will the product accept an Interlace signal?
A:
No. If an Interlace signal is used, the screen displays both odd and even horizontal
scanning lines at the same time, thus distorting the picture.
Q:
What does the Refresh Rate mean for LCD?
A:
Unlike CRT display technology, in which the speed of the electron beam is swept from
the top to the bottom of the screen determines flicker, an active matrix display uses an
active element (TFT) to control each individual pixel and the refresh rate is therefore not
really applicable to LCD technology.
file:///D|/My%20documents/dfu/B2C_TV_NAFTA/ENGLISH/170T4/safety/saf_faq.htm (2 of 9)6/30/2004 11:37:11 AM