Gear Selector; Parking Brake - Polaris RZR 170 Owner's Manual

Gear Selector

F: Forward
N: Neutral
R: Reverse
The gear selector is located between
the seats. To change gears, stop the
vehicle, and with the engine idling,
move the lever to the desired gear.
Do not attempt to shift gears with
engine speed above idle or while the
vehicle is moving.
Tip: Maintaining shift linkage adjustment is important to assure proper
transmission function. Your POLARIS dealer can assist in resolving any
shifting problems.
NOTICE: Do not attempt to shift the transmission while the vehicle is moving or
damage to the transmission could result. Always shift when the
vehicle is stationary and the engine is at idle.

Parking Brake

1. Apply the brakes.
2. When the vehicle is fully stopped, pull the parking brake lever
rearward as far as possible to set the parking brake.
3. Stop the engine.
4. To release the parking brake, apply the brakes and push the lever
toward the passenger seat and forward.
5. See page 64 for parking brake adjustment procedures.
Tip: Always set the parking brake whenever the vehicle is left unattended.
Operating the vehicle while the parking brake is engaged could cause an
accident resulting in serious injury or death. It could also result in driveline
or engine damage. Always be sure to disengage the parking brake before
operating the vehicle.
FEATURES AND CONTROLS
Gear Selector
33