Removal Of Front Glass, V1, V2-Board And Cabinet - Panasonic TH-42PH12ES Service Manual

更多难得资料请到江南家电维修论坛免费下载！
http://bbs.520101.com
4. Reassemble the Fans in reverse order.
5. Stick the Fan Sponges around the Fan.
Note:
The Fan Sponge is not re-usable.
Please use a new one when Fan exchange.
9.19. Removal of Front Glass, V1,
V2-Board and Cabinet
1. Remove the S1-Board Block.
(Refer to Removal of S1-Board)
2. Disconnect the connectors (DS2, DS15).
3. Remove 6 screws.
4. Pull the bottom of the Plasma Display Panel forward
(arrow1).
5. Slide the Plasma Display Panel and then remove the
Plasma Display Panel (arrow2).
9.19.1. Removal of Front Glass
1. Remove 23 screws and then remove the Fixed Angles
(left, right, upper, bottom).
2. Remove the Front Glass.
Note: when Front Glass is exchanged
• Paste the Front Glass Cushions in order along each
Fixed Angles left and right, upper and bottom.
Note
• The Front Glass Cushions are parts which cannot be
recycled. Please use the new article when you exchange
the Front Glass.
9.19.2. Removal of V1-Board and V2-Board
1. Remove 12 screws and then remove the Fixed Angles
(right, bottom).
25
TH-42PH12EK / TH-42PH12ES