Disassembly And Assembly Instructions; Removal Of Rear Cover; Removal Of Hu-Board; Removal Of Slot Block - Panasonic TH-42PH12ES Service Manual

更多难得资料请到江南家电维修论坛免费下载！
http://bbs.520101.com
TH-42PH12EK / TH-42PH12ES
9 Disassembly and Assem-
bly Instructions
• To disassemble P.C.B., wait for 1 minute after power was off
for discharge from electrolysis capacitors.
• , , , and marks indicate screw positions.
9.1.

Removal of Rear Cover

1. Remove screws (×13
the Rear Cover.
9.2.

Removal of HU-Board

1. Remove 4 screws (A) and then remove the HU-Terminal
Block.
2. Remove 4 screws (B).
3. Remove 3 screws (C) and then remove HU-Board.
, ×23 , ×4
) and then remove
9.3.

Removal of Slot Block

1. Remove the flexible cables from the connectors (DS1,
DS3).
2. Disconnect the connectors (DS2, DS4, DS6, DS7, DS8,
DS15).
3. Remove 5 screws and then remove the Slot Block.
9.4.

Removal of HX-Board

1. Remove the Slot Block.
(Refer to Removal of Slot Block)
2. Remove 6 screws and then remove the Slot Case.
3. Disconnect the connector (HX1).
4. Remove 4 Hexagonal-Head screws and 2 screws of HX-
Board and then remove HX-Board.
20