Dell optiplex 790 Owner's Manual page 65

Virtualization Support
VT for Direct I/O
Maintenance
Service Tag
Asset Tag
SERR Messages
Image Server
Lookup Method
ImageServer IP
ImageServer Port
Enables or disables the Virtual Machine Monitor (VMM) from
utilizing the additional hardware capabilities provided by
Intel® Virtualization technology for direct I/O. Enable Intel®
Virtualization Technology for Direct I/O — This option is
disabled by default.
Displays the Service Tag of your computer.
Allows you to create a system asset tag if an asset tag is not
already set. This option is not set by default.
Controls the SERR message mechanism. This option is not set
by default. Some graphics cards require that the SERR
message mechanism be disabled.
Specifies how the ImageServer looks up the server address.
• Static IP
• DNS (enabled by default)
NOTE: This field is only relevant when the "Integrated NIC"
control in the "System Configuration" group is set to
"Enabled with ImageServer".
Specifies the primary static IP address of the ImageServer
with which the client software communicates. The default IP
address is 255.255.255.255.
NOTE: This field is only relevant when the "Integrated NIC"
control in the "System Configuration" group is set to
"Enabled with ImageServer" and when "Lookup Method" is
set to "Static IP".
Specifies the primary IP port of the ImageServer with which
the client communicates. The default IP port is 06910.
NOTE: This field is only relevant when the "Integrated NIC"
control in the "System Configuration" group is set to
"Enabled with ImageServer".
65