Fujitsu WPYA100LA Service Manual page 22

１ １.FAN MOTOR removal
Nut
Remove the fixing nut.
Remove the PRPELLER FAN.
Note at the installation.
Tightening torque is from 4.0 to 6.0 N・m.
Screw
Note at the installation.
Remove the screws. (4 places)
Remove the FAN MOTER.
Cable for the FAN MOTOR
Remove the cable for the FAN MOTOR.
from the hooks in the fan bracket. (3 places)
-22-
Cable for the SENSOR (TEMP.OUTDOOR)
Hook