Memory Seats - Chevrolet SS Sedan 2017 Owner's Manual

48 Seats and Restraints

Memory Seats

S
The 1, 2, SET, and (Exit) buttons
on the driver door are used to
manually store and recall memory
settings for the driver seat and
outside mirrors.
Storing Memory Positions
To store positions to the 1 and 2
buttons:
1. Place the ignition in ON/RUN
or ACCESSORY.
2. Adjust the driver seat and the
outside mirrors to the desired
driving position.
3. Press and release SET. A beep
will sound.
4. Immediately press and hold 1
until two beeps sound.
5. Repeat Steps 1–4 for a second
driver using 2.
To store positions to the
button and easy exit features,
S
repeat Steps 1–4 using
your position for getting out of the
vehicle.
Manually Recalling Memory
Positions
S
Press and hold 1, 2, or
manually recall the previously
stored memory positions.
To stop recall movement, release 1,
B
2, or before the stored positions
are reached; or press the SET,
power mirror, or power seat
controls.
Automatically Recalling Memory
Positions (Auto Memory Recall)
If programmed in vehicle
personalization, the Auto Memory
Recall feature (automatic
transmission vehicles only)
automatically recalls the current
driver's previously stored 1 or 2
position when the ignition is
changed from OFF to ON/RUN or
ACCESSORY.
See "Auto Memory Recall" under
S
"Comfort and Convenience" in
(Exit)
Vehicle Personalization 0 120.
to store
To stop recall movement, press
power mirror, or power seat
controls. Turning the ignition off also
stops the recall.
RKE transmitters are not labeled
with a number. If your memory seat
to
position is stored to 1 or 2, but this
position is not automatically
recalling, then store your positions
to the other button or switch RKE
transmitters with the other driver.
If the vehicle's driver has changed,
in some vehicles the Driver ID may
be displayed for the next few
ignition cycles.
Easy Exit Driver Seat
If programmed on in vehicle
personalization, the easy exit
feature automatically moves the
B
,