Tire Inspection; Tire Rotation - Chevrolet SS Sedan 2017 Owner's Manual

Table of Contents

Advertisement

11. Proceed to the left rear tire,
and repeat the procedure in
Step 8. The horn sounds two
times to indicate the sensor
identification code has been
matched to the left rear tire,
and the TPMS sensor matching
process is no longer active.
The TIRE LEARN or TIRE
LEARNING ACTIVE message
on the infotainment display
goes off.
12. Turn the vehicle off.
13. Set all four tires to the
recommended air pressure
level as indicated on the Tire
and Loading Information label.

Tire Inspection

We recommend that the tires,
including the spare tire, if the
vehicle has one, be inspected
for signs of wear or damage at
least once a month.
Replace the tire if:
The indicators at three or
.
more places around the tire
can be seen.
There is cord or fabric
.
showing through the tire's
rubber.
The tread or sidewall is
.
cracked, cut, or snagged
deep enough to show cord or
fabric.
The tire has a bump, bulge,
.
or split.
The tire has a puncture, cut,
.
or other damage that cannot
be repaired well because of
the size or location of the
damage.
Vehicle Care

Tire Rotation

The tires should be rotated
every 12 000 km/7,500 mi. See
Maintenance Schedule 0 349.
Tires are rotated to achieve
uniform wear for all tires. The
first rotation is the most
important.
Anytime unusual wear is
noticed, rotate the tires as soon
as possible, check for proper tire
inflation pressure, and check for
damaged tires or wheels. If the
unusual wear continues after the
rotation, check the wheel
alignment. See When It Is Time
for New Tires 0 316 and Wheel
Replacement 0 320.
Different tire sizes should not be
rotated front to rear.
315

Advertisement

Table of Contents
loading

Table of Contents