System Switch (H E At/C O O L) - Honeywell PRO 2000 Series Operating Manual

Operating Manual
System switch
Use the System switch to place the system in one of the
following modes:
• Cool: System is in Cooling mode.
• Off: System is off.
• Heat: System is in Heating mode.
• Em Heat: System is in Emergency Heat mode. Only auxiliary
heating can be activated. The compressor is disabled. (This
mode is available on the TH2210D model only.)
CA U TIO N : E Q U IP M E N T D A M A G E H A ZA R D .
Do not use Cooling mode when the outdoor
temperature is below 50 0 F (10 °C).
6