Philips 105E User Manual page 58

Front Controls
1.
When pressing any function pad, the "Shift" LED will flash once
to indicate the function has been selected.
2.
Once the limit of the adjustable range has been reached, the shift LED will flash
continuously.
Adjustment
For Tne monitor is pre-set with 6 modes for optimal display size and centering as indicated in the following
table:
Mode
VGA
VGA
VESA / 75
VESA / 75
VESA / 85
VESA
(A) User mode: (10 modes)
The set will save the user's setting parameters automatically.
After 10 seconds of key-pad inactivity, the LED will flash twice to
indicaate the parameters being saved.
Press to recall factory preset mode. (at second level)
file:///D|/EDFU/LF3/lf3manual/english/Install_1/FRONT/Front.htm (3 of 3) [2003/3/27 ?? 10:40:35]
RETURN TO TOP OF THE PAGE
Resolution
Freq. (KHz)
(dots x lines)
600 X 400
600 X 480
600 X 480
600 X 480
800 X 600
1024 X 768
RETURN TO TOP OF THE PAGE
Horizontal Vertical
Freq. (KHz)
31.5
31.5
37.5
46.9
53.7
48.3
70 Non-interlaced
60 Non-interlaced
75 Non-interlaced
75 Non-interlaced
85 Non-interlaced
60 Non-interlaced
Remark