Philips 105E User Manual
  1. Manuals
  2. Brands
  3. Philips Manuals
  4. Monitor
  5. 105E
  6. User manual

Philips 105E User Manual

Philips monitor user's manual 105e
Hide thumbs Also See for 105E:
Table of Contents

Advertisement

Quick Links

See also: User Manual
electronic user's manual
file:///D|/EDFU/LF3/lf3manual/english/105E/manual.html [2003/3/27 ?? 10:39:26]

Advertisement

Table of Contents
loading

Related Manuals for Philips 105E

Summary of Contents for Philips 105E

  • Page 1 [2003/3/27 ?? 10:39:26]...

  • Page 2: Safety And Troubleshooting Information

    Read and follow these instructions when connecting and using your computer monitor: Disconnect the monitor from the power supply if the monitor is not to be used for an extended period of time.

  • Page 3: About This Guide

    Other Documents You May Need About This Guide This electronic user's guide is intended for anyone who uses the Philips Color Monitor. It describes the monitor's features, setup, operation and all other information, which is the same exact information described in our printed version.

  • Page 4: Notational Descriptions

    ©2003 Koninklijke Philips Electronics N.V. All rights reserved. Reproduction, copying, usage, modifying, hiring, renting, public performance, transmission and/or broadcasting in whole or in part is prohibited without written consent of Philips Electronics N.V. file:///D|/EDFU/LF3/lf3manual/english/105E/ABOUT/ABOUT.HTM (2 of 2) [2003/3/27 ?? 10:39:50]...

  • Page 5: Product Information

    • Recommended display area • Maximum display area SCANNING • Horizontal scanning • Vertical scanning VIDEO file:///D|/EDFU/LF3/lf3manual/english/105E/PRODUCT/PRODUCT.HTM (1 of 4) [2003/3/27 ?? 10:39:51] • Automatic Power Saving • Product Views RETURN TO TOP OF THE PAGE 15 inch / 38 cm ; 90° deflection angle 0.28 mm...
  • Page 6 Video Mode Active Blanked This monitor is NERGY determined that this product meets the file:///D|/EDFU/LF3/lf3manual/english/105E/PRODUCT/PRODUCT.HTM (2 of 4) [2003/3/27 ?? 10:39:51] 65 MHz 75 ohm 2.2 kOhm 0.7 Vpp Separate sync Positive and negative x = 0.281 / y = 0.311...

  • Page 7: Physical Specifications

    Red video ground Green video ground file:///D|/EDFU/LF3/lf3manual/english/105E/PRODUCT/PRODUCT.HTM (3 of 4) [2003/3/27 ?? 10:39:51] 14.1" x 14.9" x 14.9" / 358 x 380 x 379 mm (including base) 14.1" x 13.2" x 14.9" / 358 x 335 x 379 mm (excluding base) 11.5 kg...

  • Page 8: Front View

    Blue video ground Views Follow the links to see various views of the monitor and its components. Front View Rear View file:///D|/EDFU/LF3/lf3manual/english/105E/PRODUCT/PRODUCT.HTM (4 of 4) [2003/3/27 ?? 10:39:51] RETURN TO TOP OF THE PAGE RETURN TO TOP OF THE PAGE...

  • Page 9: Installing Your Monitor

    Installing your Monitor Installing your Monitor Front View • Rear View • Pedestal •PCUH411 USB Hub (option) Front View For detailed information about the knobs and keys, please refer to Rear View file:///D|/EDFU/LF3/lf3manual/english/INSTALL_1/INSTALL.HTM (1 of 2) [2003/3/27 ?? 10:39:51] Front RETURN TO TOP OF THE PAGE Controls.
  • Page 10 Installing your Monitor Power in - attach power cable here. Video In - this is a cable which is already attached to your monitor. Connect the other end of the cable to your PC. file:///D|/EDFU/LF3/lf3manual/english/INSTALL_1/INSTALL.HTM (2 of 2) [2003/3/27 ?? 10:39:51] RETURN TO TOP OF THE PAGE...

  • Page 11: Customer Care And Warranty

    Customer Care and Warranty Customer Care & Warranty PLEASE SELECT YOUR COUNTRY/AREA TO READ THE WARRANTY COVERED: WESTERN EUROPE: Austria • Belgium • Cyprus • Denmark • France • Germany • Greece • Finland • Ireland • Italy • Luxembourg • the Netherlands • Norway • Portugal • Sweden • Switzerland •...
  • Page 12 USB hub is always within reach for convenient connection and disconnection of USB peripherals. Where can I buy a USB hub for my Philips monitor? Philips provides an optional USB hub (type number: PCUH411) which can be attached to the file:///D|/EDFU/LF3/lf3manual/english/FAQ.HTM (1 of 12) [2003/3/27 ?? 10:39:51] Frequently Asked Questions...
  • Page 13 Philips monitors. Contact your dealer/reseller for details. What models are Mac compatible? All listed Philips monitors are Mac compatible. BUT, you may need an adapter to connect the monitor to your Mac system. Please contact your dealer/reseller for details.
  • Page 14 Go to 'My Computer' and select 'Control Panel' followed by 'Monitor Control.' Select "All default selection' and choose your Philips monitor model from the default driver list. Plug and Play will automatically enable the EPA tick box for you. In DOS or Windows 3.1, you must first make sure your PC supports power saving.
  • Page 15 16. What is LightFrame ™ LightFrame is a Philips technology breakthrough which offers a unique and revolutionary solution for boosting a monitor 's brightness and sharpness. With LightFrame experiences TV quality performance for video or photos without deterioration to the monitor 's file:///D|/EDFU/LF3/lf3manual/english/FAQ.HTM (4 of 12) [2003/3/27 ?? 10:39:51]...
  • Page 16 19. Will anyone else have this? ™ LightFrame was invented, developed and patented by Philips. It is a unique feature that you will find exclusively in Philips monitors. ™ 20. Will LightFrame shorten the life of a monitor? No.
  • Page 17 Only a Philips driver can determine if your monitor is equipped with LightFrame Windows driver cannot. Install the special Philips driver that came with your monitor. If the warning continues to flash after your Philips driver is installed, ignore the message.
  • Page 18 Only the monitor's height is increased by only 3 centimeters. 29. Where can I buy a multimedia base to incorporate with my Philips monitor? Please contact your dealer/reseller for details.
  • Page 19 Auto Calibration takes place when a monitor receives a signal indicating an imminent switch to its sleep mode/stand-by mode. 34. Which models of Philips monitors are equipped with Auto Calibrate feature? Auto Calibrate is currently available in the new 201P, 201B and 109P.
  • Page 20 Change horizontal and vertical size to optimize the reduction of the Moire effect. 39. What is CustoMax? CustoMax is proprietary Philips software that allows user to control parameter (e.g. Size, Color, Geometry) in place of the buttons on the front of the monitor. To install and run the CustoMax software, you must have a USB compatible system and have a USB connection at the rear of your monitor.
  • Page 21 Philips monitors. Please be aware that not all models in the Philips range has this manual degauss function. Some models are built with an auto degauss feature which automatically degausses the monitor when it is switched on.
  • Page 22 Set the Contrast to maximum level (100) and Brightness to middle level (50) Video card could be defective (try the monitor with another computer) 45. I have noticed two thin horizontal lines on the screen of my Philips monitor. Is this normal? This phenomenon can occur with Philips 107P, 109P and 201P monitors and is normal.
  • Page 23 50. Why does the picture disappear after I press the on/off button quickly? This is a unique Philips feature designed to preserve the life of your monitor. Please allow 5 seconds between powering off and on your monitor, your picture will then be restored.
  • Page 24 L M N O P Autoscan A microprocessor-based feature of Philips Brilliance monitors is able to detect automatically horizontal and vertical frequencies of input signals with those of the installed video card. An autoscan monitor can thus operate with a wide range of video cards. MultiSync, a registered trademark of NEC, provides a similar function.

  • Page 25: Color Temperature

    A way of describing the color of a radiating source in terms of the temperature (in degrees Kelvin) of a black body radiating with the same dominant frequency as the source. Most Philips monitors offer the possibility of setting the color temperature to any desired value. Contrast The ratio between the brightness of the brightest and darkest parts of a picture.
  • Page 26 TV and monitor picture tube. CustoMax Philips proprietary monitor control software that allows users to control parameters (e.g., Size, Color, Geometry) using software running in Windows. CustoMax is compatible with existing VGA cards. See CrystalClear FAQ and USB Bay FAQ.

  • Page 27: Digital Control

    This is a very advanced feature that allows the user to switch to any required mode at any instant without having to spend time readjusting the picture. It is currently available in most Philips monitors. Dot pitch The shortest distance between two phosphor dots of the same color on the screen.
  • Page 28 Glossary Dot rate Frequency in MHz of the dot clock. It is a measure of the speed with which data is transferred between the video card and subsequent processing circuitry. Also known as video dot rate. Electromagnetic radiation standards International standards set to limit electromagnetic emissions from monitors. There are currently two important standards both derived from regulations originally laid down by Swedish authorities.
  • Page 29 Glossary In 1991, the Swedish Tjänstemannens Central Organization (TCO, Swedish confederation of Professional Employees ) set a standard even more severe than MPR-II, especially for alternating electric fields (AEF). The TCO standard is more severe since not only are the permitted field levels reduced compared with MPR-II, but the measuring distance is also reduced (see table).
  • Page 30 Glossary Also called line frequency and expressed in kHz, it is the number of video lines written on the screen every second (from left to right). The higher the horizontal scanning frequency, the better the resolution (i.e., the higher the resolution and/or the higher the refresh rate). INF File INF file (Information File) Information (INF) files store information in a specific format.

  • Page 31: Line Frequency

    Glossary Linearity The degree to measure the actual location of a pixel on the screen corresponds with its intended location. ( see figure ) Line frequency See Horizontal scanning frequency. Low-emission monitor A monitor that complies with international standards on radiation. See Electromagnetic radiation standards.
  • Page 32 Glossary Moiré effect A fringe pattern arising from the interference between two superimposed line patterns. In a monitor it comes from the interference between the shadow mask pattern and the video information (video moiré), and between the shadow mask pattern and the horizontal line pattern (scan moiré). It shows itself as wavy patterns on the screen and becomes more noticeable as monitor resolution increases.
  • Page 33 Glossary screen area, resulting in an image that is smaller (and less legible) than it needs to be. Parallelogram Distortion See Geometric distortion. Phosphor Generic name for the class of substances that exhibit luminescence. To produce a picture on screen, phosphors are deposited on the inner surface of the picture-tube screen and excited into luminescence by the electron beam.

  • Page 34: Refresh Rate

    Glossary Raster The area on screen that electron beam can reach. Refresh rate See Vertical scanning frequency. Resolution The number of pixels that can be displayed on the screen. The resolution is specified as the number of pixels in a line multiplied by the number of horizontal lines. See also video graphic adapter.
  • Page 35 Glossary Anti-Static coatings Due to bombardment by beam electrons, monitor screens become electrically charged when in use. Electrically charged screens surfaces can attract dust particles. An Anti-Static coating is a conductive coating deposited on the screen (or on a glass panel immediately in front of the screen) that conducts away the charge and prevents screen dust build-up.

  • Page 36: Self-Test Function

    Glossary The ARAS coating reflects only about 0.5% of the incident light. AGRAS (Anti-Glare anti-Reflection Anti-Static) coating. A combined anti-reflection, anti-glare, anti-static coating. Self-test function A monitor equipped with hardware or software to automatically detect cable connection status. Shape Deviation of a reproduced picture from its intended shape. The following types of distortion are most common: file:///D|/EDFU/LF3/lf3manual/english/GLOSSARY/GLOSSARY.HTM (13 of 18) [2003/3/27 ?? 10:39:52]...

  • Page 37: Tilt Function

    Glossary SOG (Synchronization On Green) A properly functioning color monitor requires five kinds of signals: horizontal sync pulse, vertical sync pulse, red color signal, green color signal and blue color signal. Signals from a PC are transmitted to a monitor using one of three methods: 1.
  • Page 38 Glossary See rotation function. Trapezoid distortion See Geometrical distortion. TTL signal A TTL (Transistor-transistor-logic) signal is a digital signal level for controlling the screen colors. With TTL driving, the red, green and blue signals can only be switched on or off or provided with an intensity signal. A TTL-driven monitor can thus display a maximum of 64 colors.
  • Page 39 Glossary signaling. A hub consists of two portions: the Hub Controller and Hub Repeater. The repeater is a protocol-controlled switch between the upstream port and downstream ports. It also has hardware support for reset and suspend/resume signaling. The controller provides the interface registers to allow communication to/from the host.
  • Page 40 Glossary Vertical dot pitch See Dot pitch. Vertical scanning frequency Expressed in Hz, this is the number of fields written to the screen every second in interlaced mode. In non-interlaced mode vertical scanning frequency is the number of frames (complete pictures) written to the screen every second (also known as refresh rate).
  • Page 41 Glossary resolutions from 1280 x 1024 to 1600 x 1280, horizontal line frequencies up to 90 kHz and bandwidths up to 200 MHz. VIS (Viewable Image Size) The real screen dimensions that users can see measured diagonally. The VIS of a monitor is always less than the so called screen size of a monitor.

  • Page 42: Download And Print

    3. Choose where you would like to save the image; click 'Save' (if prompted to save as either 'text' or 'source', choose 'source'). Printing instructions: To print the manual: 1. With the manual file open, follow your printer's instructions and print the pages you need. 105E.pdf 107B.pdf 107G.pdf 107E.pdf 107F.pdf 107P.pdf...
  • Page 43 Download and Print 107X.pdf 109B.pdf 109S.pdf file:///D|/EDFU/LF3/lf3manual/english/DOWNLOAD/DOWNLOAD.HTM (2 of 2) [2003/3/27 ?? 10:39:53]...

  • Page 44: Troubleshooting

    Screen doesn't show when you turn on the monitor No color or intermittent color Color appears blotchy file:///D|/EDFU/LF3/lf3manual/english/105E/SAFETY/saf_troub.htm (1 of 2) [2003/3/27 ?? 10:40:13] • Troubleshooting • Regulatory Information Check these items Make sure the Power cable is plugged into the power outlet and back of the monitor.
  • Page 45 Problem with On Screen Display For further assistance, refer to the distributor. file:///D|/EDFU/LF3/lf3manual/english/105E/SAFETY/saf_troub.htm (2 of 2) [2003/3/27 ?? 10:40:13] Check the Color Temperature. Make sure the monitor cable is properly connected to your computer. Check to see if the monitor cable has bent pins.

  • Page 46: Regulatory Information

    Hinweis (nur Deutschland) Safety Precautions and Maintenance CE Declaration of Conformity Philips Consumer Electronics declare under our responsibility that the product is in conformity with the following standards - EN60950:1992+A1+A2+A3+A4+A11 (Safety requirement of Information Technology Equipment) - EN55022:1998 (Radio Disturbance requirement of Information Technology Equipment)

  • Page 47: Federal Communications Commission (Fcc) Notice (U.s. Only)

    Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Use only RF shielded cable that was supplied with the monitor when connecting this monitor to a computer file:///D|/EDFU/LF3/lf3manual/english/105E/SAFETY/regs/regulat.htm (2 of 9) [2003/3/27 ?? 10:40:14] LED Indicator Green Yellow ®...

  • Page 48: Commission Federale De La Communication (Fcc Declaration)

    CET APPAREIL NUMERIQUE DE LA CLASSE B RESPECTE TOUTES LES EXIGENCES DU REGLEMENT SUR LE MATERIEL BROUILLEUR DU CANADA. EN 55022 Compliance (Czech Republic Only) file:///D|/EDFU/LF3/lf3manual/english/105E/SAFETY/regs/regulat.htm (3 of 9) [2003/3/27 ?? 10:40:14] RETURN TO TOP OF THE PAGE RETURN TO TOP OF THE PAGE...
  • Page 49 Interference. Install and use the equipment according to the instruction manual. Class B ITE MIC Notice (South Korea Only) Class B Device file:///D|/EDFU/LF3/lf3manual/english/105E/SAFETY/regs/regulat.htm (4 of 9) [2003/3/27 ?? 10:40:14] RETURN TO TOP OF THE PAGE RETURN TO TOP OF THE PAGE...

  • Page 50: Polish Center For Testing And Certification Notice

    A protection mark "B" confirms that the equipment is in compliance with the protection usage requirements of standards PN-93/T-42107 and PN-89/E-06251. file:///D|/EDFU/LF3/lf3manual/english/105E/SAFETY/regs/regulat.htm (5 of 9) [2003/3/27 ?? 10:40:14] RETURN TO TOP OF THE PAGE...
  • Page 51 FÖRSÄKRA DIG OM ATT HUVUDBRYTARE OCH UTTAG ÄR LÄTÅTKOMLIGA, NÄR DU STÄLLER DIN UTRUSTNING PÅPLATS. Placering/Ventilation ADVARSEL: SØRG VED PLACERINGEN FOR, AT NETLEDNINGENS STIK OG STIKKONTAKT ER NEMT TILGÆNGELIGE. file:///D|/EDFU/LF3/lf3manual/english/105E/SAFETY/regs/regulat.htm (6 of 9) [2003/3/27 ?? 10:40:14] RETURN TO TOP OF THE PAGE...
  • Page 52 Damit Ihr Monitor immer den in der Zulassung geforderten Werten entspricht, ist darauf zu achten, daß Reparaturen nur durch Fachpersonal durchgeführt werden. nur original-Ersatzteile verwendet werden. bei Ersatz der Bildröhre nur eine bauartgleiche eingebaut wird. file:///D|/EDFU/LF3/lf3manual/english/105E/SAFETY/regs/regulat.htm (7 of 9) [2003/3/27 ?? 10:40:14] RETURN TO TOP OF THE PAGE RETURN TO TOP OF THE PAGE...
  • Page 53 Your new monitor contains materials that can be recycled and reused. Specialized companies can recycle your product to increase the amount of reusable materials and to minimize the amount to be disposed of. Please find out about the local regulations on how to dispose of your old monitor from your local Philips dealer.
  • Page 54 Regulatory Information file:///D|/EDFU/LF3/lf3manual/english/105E/SAFETY/regs/regulat.htm (9 of 9) [2003/3/27 ?? 10:40:14] have a value of 5A. If a plug without a fuse is used, the fuse at the distribution board should not be greater than 5A. Note: The severed plug must be destroyed to avoid a possible shock hazard should it be inserted into a 13A socket elsewhere.

  • Page 55: Other Related Information

    Use a Cord Set rated minimum 5 A, 250 V ( for units set at 230V ) or 10A, 125V (for units set at 115V). The Cord Set should have the appropriate safety approvals for the country in which the equipment will be installed. file:///D|/EDFU/LF3/lf3manual/english/105E/SAFETY/saf_other.htm [2003/3/27 ?? 10:40:14] • Troubleshooting •...

  • Page 56: Front Controls

    Front Controls Front Controls Power • Hotkeys • Digital Controls Front Controls For an optimized adjustment of the picture following controls are available at the front. Power Power Press this knob, the green LED lights and the power is ON. Press this knob again, the green LED disappears and the power is OFF.
  • Page 57 Front Controls Press to adjust (increase) the function selected. Press to adjust (decrease) the function selected. To select the level of function. "SHIFT" LED off - control is on first level. "SHIFT" LED on - control is on second level. The function pads: H-Shift: to adjust the horizontal position of the image.
  • Page 58 Front Controls When pressing any function pad, the "Shift" LED will flash once to indicate the function has been selected. Once the limit of the adjustable range has been reached, the shift LED will flash continuously. Adjustment For Tne monitor is pre-set with 6 modes for optimal display size and centering as indicated in the following table: Mode Resolution...
  • Page 59 Pedestal Pedestal Front View • Rear View • Installing your Base Installing your Pedestal file:///D|/EDFU/LF3/lf3manual/english/INSTALL_1/mm_pede/mm_inst.htm [2003/3/27 ?? 10:40:46] 1. To INSTALL Slide the pedestal, aligning with the holes on the side. Then click the back hook into the corresponding hole on the bottom plate of your monitor. 2.
  • Page 60 USB Hub (Optional Feature) PCUH411 USB Hub (Option) Front View • Rear View • Installing your USB Hub Installing your USB Hub file:///D|/EDFU/LF3/lf3manual/english/INSTALL_1/usbhub/usb_inst.htm [2003/3/27 ?? 10:40:46] RETURN TO TOP OF THE PAGE Installing on a conventional base. Take out the USB hub from the box.
  • Page 61 - the monitor is not defective and is within the specification - the monitor has been altered or repaired by non authorised persons If warranty claims are determined to be invalid, Philips may invoice the customer for all related repair, verification and transportation costs.

  • Page 62: Your International Guarantee

    12 months from date of purchase. This international Philips guarantee complements the existing national guarantee obligations to you of dealers and Philips in the country of purchase and does not affect your statutory rights as a customer.
  • Page 63 A product that has been modified from the original design. Where IS SERVICE AVAILABLE? Warranty service is available in all countries where the product is officially distributed by Philips Consumer Electronics. In countries where Philips Consumer Electronics does not distribute the product, the local Philips service organization will attempt to provide service (although there may be a delay if the appropriate spare parts and technical manual(s) are not readily available).
  • Page 64 Please contact Philips at: (800) 479-6696 One year free parts and one year free labor will be provided at Philips Canada depot or any one of its authorized service centers. REMEMBER... Please record the model and serial numbers found on the product below.
  • Page 65 - the monitor is not defective and is within the specification - the monitor has been altered or repaired by non authorised persons If warranty claims are determined to be invalid, Philips may invoice the customer for all related repair, verification and transportation costs.
  • Page 66 Where IS SERVICE AVAILABLE? Warranty service is available in all countries where the product is officially distributed by Philips Consumer Electronics. In countries where Philips Consumer Electronics does not distribute the product, the local file:///D|/EDFU/LF3/lf3manual/english/WARRANTY/WAR_USA.HTM (1 of 3) [2003/3/27 ?? 10:40:58]...
  • Page 67 Please contact Philips at: (800) 479-6696 Three years free parts and three years free labor will be provided at Philips Canada depot or any one of its authorized service centers. (In Canada, this warranty is given in lieu of all other warranties. No other warranties are expressed or implied, including any implied warranties of merchantability or fitness for a particular purpose.
  • Page 68 Just a phone call away Philips’ customer help desks are located worldwide. You can contact Philips Monday - Friday from 08.00 - 20.00 hrs Central European Time (CET) and on Saturdays and Sundays from 10.00 to 18.00 hrs CET by using one of the toll-free numbers.

This manual is also suitable for:

105e11/05n105e11105e11-07n105e11-75n105e11-87n105e11-95n ... Show all

Table of Contents