Default Network Settings - Canon g3000 series Online Manual

Default Network Settings

LAN Connection Defaults
Item
Enable/disable Wireless LAN
SSID
Communication mode
Wireless LAN security
IPv4 IP address
IPv6 IP address
Set printer name
Enable/disable IPv6
Enable/disable WSD (WSD settings)
Timeout setting (WSD settings)
Enable/disable Bonjour (Bonjour settings) Enable
Service name (Bonjour settings)
LPR protocol setting
("XXXXXX" represents last six digits of machine's MAC address.)
Access Point Mode Defaults
Item
SSID (access point name) *1 XXXXXX-G3000series
Security setting
Password *2
*1 "XXXXXX" represents last six digits of machine's MAC address.
*2 Default value depends on machine.
Default
Enable
BJNPSETUP
Infrastructure
Disable
Auto setup
Auto setup
XXXXXX000000
Enable
Enable
1 minute
Canon G3000 series
Enable
Default
WPA2-PSK (AES)
machine serial number
207