Washing Procedure And Programe Selection - Daewoo DWD-FD1411 Instruction Manual

Hide thumbs Also See for DWD-FD1411:
Table of Contents

Advertisement

WASHING PROCEDURE AND PROGRAMME SELECTION
1. COTTON IS AUTOMATICALLY SELECTED WHEN THE POWER BUTTON IS PRESSED.
• Press the Power button to start.
• Press the Start/Hold button
• Initial cycle:
- Programme : Cotton
- Wash : main wash
- Rinse : 3 times
- Spin : 800 rpm
- Water temperature : 40˚C
2. MANUAL SELECTION
• Press the Power button to start
• Select the cycle you want by turning the programme dial and pressing each button.
• Press the Start/Hold button.
3. TIME DELAYED WASHING
• A washing cycle may be programmed to finish up to 12 hours later.
For example, should you wish to delay the wash so that it will finish in eight hours' time:
- Press the Time Delay Button
* Each pressing of the button advances time delay by one hour.
• Now the timer is set.
• If you want to check the selected programme, press the "Start/Hold" button again.
• Preparing washing before starting "Time Delay";
- Load laundry and close the door
- Place the detergent and fabric softener in the detergent compartment.
• To cancel the time delay, press the Power button.
Downloaded From WashingMachine-Manual.com Manuals
select the
program
or manual
ajust to "8"
10

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents