Fan And Fan Motor - Mitsubishi Electric SEZ-KC25VA Technical & Service Manual

7-2. FAN and FAN MOTOR

OPERATING PROCEDURE
1.Removing the fan casing and sirocco fan.
(1) Remove the bottom plate B. (fixing screws : six) (Fig. 3)
(2) Remove the fixing screws (three) of the fan cover, and turn
it in direction of arrow. (Fig. 4)
(3) Remove the fixing screws (two) of the fan cover, and loosen
the set screw of the sirocco fan, and remove the fan cover
and sirocco fan. (Fig. 5)
2.Removing the fan motor.
(1) Remove the control box. (fixing screws : two) (Fig. 7)
(2) Move the control box to place that is not block operation.
(Fig. 8)
(3) Remove the fan motor cable connector in the control box,
and remove the screws of the fixing plate. (Fig. 9)
fig.4
Fan cover
fig.6
fig.8
Be careful on removing heavy parts.
fig.3
Bottom plate B
fig.5
Set screw
fig.7
fig.9
14
PHOTOS
Fan motor
cable connector