Using Balance Adjustment; Using The Equalizer; Recalling Equalizer Curves; Adjusting Equalizer Curves - Pioneer DEH-P7700MP Operation Manual

Audio Adjustments

Using balance adjustment

You can select a fader/balance setting that
provides an ideal listening environment in all
occupied seats.
1 Use Multi-Control to select FAD.
FAD appears in the display.
# If the balance setting has been previously ad
justed, BAL will be displayed.
2 Push Multi-Control up or down to ad-
just front/rear speaker balance.
Each pushing Multi-Control up or down
moves the front/rear speaker balance towards
the front or the rear.
F 15  R 15 is displayed as the front/rear
speaker balance moves from front to rear.
# F/R 0 is the proper setting when only two
speakers are used.
# When the rear output setting is Rear SP :S/W,
you cannot adjust front/rear speaker balance.
Refer to Setting the rear output and subwoofer
controller on page 55.
3 Push Multi-Control left or right to ad-
just left/right speaker balance.
Each pushing Multi-Control left or right
moves the left/right speaker balance towards
the left or the right.
L 9  R 9 is displayed as the left/right speaker
balance moves from left to right.

Using the equalizer

The equalizer lets you adjust the equalization
to match car interior acoustic characteristics
as desired.

Recalling equalizer curves

There are six stored equalizer curves which
you can easily recall at any time. Here is a list
of the equalizer curves:
Display Equalizer curve
SuperBass Super bass
Powerful Powerful
Natural Natural
Vocal Vocal
Custom Custom
Flat Flat
! Custom is an adjusted equalizer curve that
you create.
! A separate Custom curve can be created
for each source. (The built in CD player and
the multi CD player are set to the same
equalizer adjustment setting automati
cally.) If you make adjustments, the equali
zer curve settings will be memorized in
Custom.
! When Flat is selected no supplement or
correction is made to the sound. This is
useful to check the effect of the equalizer
curves by switching alternatively between
Flat and a set equalizer curve.
% Press EQ to select the equalizer.
Press EQ repeatedly to switch between the fol
lowing equalizers:
SuperBassPowerfulNaturalVocal
CustomFlat

Adjusting equalizer curves

You can adjust the currently selected equalizer
curve setting as desired. Adjusted equalizer
curve settings are memorized in Custom.
1 Use Multi-Control to select EQ.
EQ appears in the display.
Section
11
49
En