Table of Contents
Advertisement
If a screen is idle for 5 minutes, backlight shuts off. Press any function key to resume the
backlight. In a Main Screen, press the function key below the symbol '
Menu (please see 8.4 Main Screen and 8.5 Main Menu).
The language default setting is English. If you want to change the default setting, please
go to
setting.
8.3
Password Entry
There are two levels of password protection:
ADMINISTRATOR
view and change all settings.
USER password only allows general users to set up (1) DATE & TIME, (2) DATE FOR-
MAT, (3) LCD CONTRAST, (4) USER PASSWORD, (5) LANGUAGE, (6) DUST FILTER
INSTALLATION and (7) DUST FILTER DUE DATE (Y-M-D).
The default setting for USER password is 0000. For ADMINISTRATOR password, please
contact service personnel. When you try to change a setting, the following screen prompts
you to enter a corresponding password.
If an interval between settings is over five minutes, you have to login and enter the
password again. If the password is wrong, the system will go back to the screen that you
have selected the item for setup change.
Ultron DPS Series
NOTE:
The language default setting may be different according to countries.
LOAD UNPROTECTED
ON AUTO BYPASS
LOGIN
ADMINISTRATOR
USER
U N I T : # 1.1
2010 - 06 - 01
11 : 59 : 59
0000
0000
8-4
' to enter into Main
to change your
Advertisement
Table of Contents
