Password Entry; Main Screen - Delta DPH series User Manual

7.3

Password Entry

There are two levels of password protection:
y
ADMINISTRATOR SDVVZRUG DOORZV TXDOL¿HG LQVWDOODWLRQ DQG PDLQWHQDQFH SHUVRQQHO WR
view and change all settings.
y
USER password only allows general users to set up (1) DATE & TIME, (2) DATE FOR-
MAT, (3) LCD CONTRAST, (4) USER PASSWORD and (5) LANGUAGE.
The default setting for USER password is 0000. For ADMINISTRATOR password, please
contact service personnel. When you try to change a setting, the following screen prompts
you to enter a corresponding password.
If an interval between settings is over five minutes, you have to login and enter the
password again. If the password is wrong, the system will go back to the screen that you
have selected the item for setup change.
7.4

Main Screen

In the Main Screen, if the message
event has occurred. Press
Main Screen. The digit in (
at maximum two) in the UPS and the warning event is related to the rack-mount PDC, the
word 'PDC' will display in the (
To clear the event logs, go to 0$,1 0(18
EVENT LOG. The ADMINSTRATOR password is required.
The backlight automatically turns off after 5 minutes of inactivity. Press any key to awaken
the LCD.
The main screen shows the operation status of the UPS:
Modulon DPH Series 25-150 kW
U N IT: #1 .1
LOAD UNPROTECTED
ON AUTO BYPASS
LOGIN
ADMINISTRATOR
USER
F1 :
PRESS
or to check the warning event. Press
) is the event code. If you install the rack-mount PDC (optional,
PRESS
) , ex.
7 - 6
2 0 1 2 - 0 1 - 2 0
1 5 : 5 5 : 0 0
* * * *
* * * *
F2 :
TO BROWSE EVENT appears, it indicates a warning
(004)
TO BROWSE EVENT
(PDC)
0$,17(1$1&(
to return to the
.
$'9$1&(' &/($5