Panasonic AG-AC30 Operating Instructions Manual page 59

∫ Using an external microphone or audio equipment
1
Connect an external microphone or audio
equipment to AUDIO INPUT1, 2 terminals (XLR
3 pin). (l 23)
2
Use INPUT1 or INPUT2 switches to switch the
connected audio input signal.
*1
LINE : Audio equipment is connected
*2
MIC : An external microphone is connected
*2
+48V : When using a phantom microphone (which requires a
power supply of +48 V)
*1 The input level varies depending on the [INPUT1 LINE
LEVEL] or [INPUT2 LINE LEVEL] setting.
*2 The input level varies depending on the
[INPUT1 MIC LEVEL] or [INPUT2 MIC LEVEL] setting.
( )
l 127
3
Use the CH1 switch to select the input signal to be recorded to audio channel
1.
INT(L): Audio from the built-in microphone L (left) ch is recorded to audio channel 1.
INPUT1: Audio from a device connected to AUDIO INPUT1 terminal (XLR 3 pin) is recorded to channel 1.
INPUT2: Audio from a device connected to AUDIO INPUT2 terminal (XLR 3 pin) is recorded to channel 1.
4
Use the CH2 switch to select the input signal to be recorded to audio channel
2.
INT(R): Audio from the built-in microphone R (right) ch is recorded to audio channel 2.
INPUT1: Audio from a device connected to AUDIO INPUT1 terminal (XLR 3 pin) is recorded to channel 2.
INPUT2: Audio from a device connected to AUDIO INPUT2 terminal (XLR 3 pin) is recorded to channel 2.
∫ Table of audio input patterns
Switch setting
CH1 switch
INT(L)
INPUT1
INPUT2
CH2 switch
INT(R) Internal microphone Lch
INPUT1 Internal microphone Lch
INPUT2 Internal microphone Lch
INT(R) AUDIO INPUT1 terminal
INPUT1 AUDIO INPUT1 terminal
INPUT2 AUDIO INPUT1 terminal
INT(R) AUDIO INPUT2 terminal
INPUT1 AUDIO INPUT2 terminal
INPUT2 AUDIO INPUT2 terminal
(l 127)
Channel or terminal used for signal input
Audio channel 1
- 59 -
A AUDIO INPUT1
terminal (XLR 3 pin)
B AUDIO INPUT2
terminal (XLR 3 pin)
Audio channel 2
Internal microphone Rch
AUDIO INPUT1 terminal
AUDIO INPUT2 terminal
Internal microphone Rch
AUDIO INPUT1 terminal
AUDIO INPUT2 terminal
Internal microphone Rch
AUDIO INPUT1 terminal
AUDIO INPUT2 terminal