Siemens sinumerik 828d Service Manual page 43

15. Switch the control on.
16. The control boots normally.
Hardware and Software
Service Manual, 03/2011, 6FC5397-5DP40-0BA0
Note
If the procedure is interrupted, then it must be restarted.
If the system CompactFlash Card is no longer identified as a bootable CompactFlash
Card, then a mini boot system must be generated on this card. (See also: This is how you
generate a mini boot system (Page 48) )
In this case, the license key of the system CompactFlash Card should be transferred to
the control.
Service cases - software
3.3 Software backup
43