PB-755S H/T
• Air filter is clean and properly installed.
• Spark arrestor screen and muffler are free of carbon.
• Blower pipes are installed.
1.
Start engine, run at idle for one
minute.
2.
Complete warm up by running at
full throttle for 5 minutes,
operating choke twice to clear
air from carburetor chambers.
3.
Check idle speed and reset if
necessary. If a tachometer is
available, idle speed screw (A)
should be set to the
specifications found on
"Specifications" Page of this manual. Turn idle screw (A) clockwise to
increase idle speed; counter clockwise to decrease idle speed.
X7531122809
© 5/2016 ECHO Inc.
MAINTENANCE
A
33