Alcatel-Lucent 7210 SAS M User Manual page 290

Targeted Session Commands
Targeted Session Commands
targeted-session
Syntax targeted-session
Context config>router>ldp
Description
This command configures targeted LDP sessions. Targeted sessions are LDP sessions between non-
directly connected peers. Hello messages are sent directly to the peer platform instead of to all the
routers on this subnet multicast address.
The discovery messages for an indirect LDP session are addressed to the specified peer and not to the
multicast address.
Default none
disable-targeted-session
Syntax [no] disable-targeted-session
Context config>router>ldp>targ-session
Description
This command disables support for SDP triggered automatic generated targeted sessions. Targeted
sessions are LDP sessions between non-directly connected peers. The discovery messages for an
indirect LDP session are addressed to the specified peer and not to the multicast address.
The no form of the command enables the set up of any targeted sessions.
Default
no disable-targeted-session
peer
Syntax [no] peer ip-address
Context config>router>ldp>targeted-session
Description
This command configures parameters for an LDP peer.
Default
none
Parameters ip-address — The IP address of the LDP peer in dotted decimal notation.
Page 290
Guide
7210 SAS M, T, X, R6, Mxp MPLS Configuration