Table of Contents
Advertisement
Configure your router
Advanced
Route: RIP Configuration
Click RIP in the left pane. The RIP Configuration page opens.
Routing Information Protocol (RIP) is an internet protocol you can
setup to share routing table information with other routing devices.
On this page, you can configure the RIP settings such as enabling or
disabling the RIP function.
•
RIP: Enable or disable the RIP function of the router.
•
Interface: The interface on which you want to enable RIP.
•
Recv Version: Indicates the RIP version in which information
must be passed to the device it can be accepted into its routing
table.
•
Send Version: Indicates the RIP version this interface will use
when it sends its route information to the other device.
The RIP Config List shows the current RIP setting of the
•
device.
34
Advertisement
Table of Contents
