Configure your router
Advanced
RIP configuration:
Click RIP in the left pane. Routing Information Protocol (RIP) is an internet
•
protocol you can setup to share routing table information with other routing
devices. In this page, you can configure the RIP settings such as enabling or
disabling the RIP function.
•
RIP: Enable or disable the RIP function of the router.
•
Interface: The interface on which you want to enable RIP.
•
Recv Version: Indicates the RIP version in which information must be
passed to the device it can be accepted into its routing table.
•
Send Version: Indicates the RIP version this interface will use when it
sends its route information to the other device.
The RIP Config List shows the current RIP setting of the device.
•
20