To Improve Reception - Philips AJ3112/12 User Manual

RADIO
You can use this set solely as a radio!
1 Adjust RADIO / ALARM to RADIO ON to switch on the radio.
2 Select your waveband by adjusting the FM/AM (MW) switch.
3 Adjust TUNING to tune to your desired station.
4 Turn the VOLUME control to adjust the volume level.
5 Adjust RADIO / ALARM to OFF to switch off the radio.

To improve reception:

FM:
Extend and position the pigtail fully to obtain optimal recep-
tion.
AM (MW): uses a built-in antenna inside the set. Direct the antenna
by adjusting the position of your set.
SETTING THE CLOCK / ALARM TIME
The time is displayed using the 12-hour clock.
1 Hold down CLOCK or ALARM.
2 Press HR or MIN repeatedly, or hold down HR or MIN to adjust
minute and/or hour.
3 Release CLOCK or ALARM and HR or MIN when you reach the
correct setting.
™ The set clock time will show on the display and start to run.
SELECTING THE ALARM MODE
To use the alarm, you must set the alarm time first. You can choose from
two different alarm modes to wake you up: by radio or buzzer.
1 Select your choice of alarm mode by adjusting RADIO / ALARM to
RADIO or BUZZ.
™ The alarm indicator (AL) will light up.