Renault TWINGO Driver's Handbook Manual page 96

TYRE PRESSURE LOSS WARNING
B
SYSTEM B (cntd.)
Resetting procedure
With the ignition on, depending on the
vehicle:
– repeatedly press button 2 or 3 to

select the "SET " warning light
on the display B;
– press and hold (around 3 seconds)
button 2 or 3 to start initialisation.
2.22
(7/9)
When the "SET" warning light flashes
for around five seconds, this indicates
that the reset request for the tyre pres-
sure reference value has been taken
into account.
2
Reinitialisation is carried out after a few
minutes' driving.
Note: the standard tyre pressure
cannot be less than that recommended
3
and indicated on the door frame.
Or
– repeatedly press the button 2 to
select the "SET
on the display B;
– press and hold (around 3 seconds)
the button 2 to start initialisation. The
flashing, lasting around five seconds,
followed by a constant display of the

"SET " indicates that the reset
request for the tyre pressure refer-
ence value has been taken into ac-
count.
Reinitialisation is carried out after a few
minutes' driving.

" warning light