Renault TWINGO Driver's Handbook Manual page 81

FUNCTION STOP AND START
1
Deactivating, activating the
function
Press switch 1 to deactivate the func-
tion. Warning light 2 in the switch lights
up.
Pressing this again will reactivate the
system. Warning light 2 in switch 1
goes out.
Special note: with the engine on
standby, press switch 1 to automati-
cally restart the engine.
(4/4)
The system is automatically reacti-
vated each time the vehicle is started
(see "Starting, stopping the engine" in
Section 2).
Operating faults
If the warning light 2 integrated on the
switch 1 comes on, the system is de-
activated.
2
Please consult an authorised dealer.
Before getting out of the
vehicle, you must switch
off the ignition (please see
section on "Starting, stop-
ping the engine").
2.7