Table of Contents
Advertisement
Pair and use a PC or PDA
A PC or PDA must also be paired with your mobile phone via the Bluetooth,
Data,
L
The pairing process will take place on both the mobile and the external device,
and the same pairing code must be entered on both devices. If not supplied
with your Bluetooth device or card, you can enter the code of your choice.
Then refer to your PC or PDA user guide for configuration information. Up to
three data profiles corresponding to the different hardware you will use can be
managed from the
from one to another, depending on your needs. This menu will also let you set
a
Default profile
it (see page 72).
Available services
A CD-Rom is shipped as standard with your mobile phone, and contains Mobile
Phone Tools, a software application giving access to the services shown below.
Insert the CD-Rom in your CD drive and follow the on-screen instructions to
proceed with a standard installation procedure. Then launch Mobile Phone
Tools. The following window appears, featuring several services:
74
Discoverable
submenu.
You must turn on both devices before running the pairing process. In this mode,
your mobile phone is detected by the PC or the PDA, from which you must launch
the pairing process which should take place within 1mn50s.
Profiles
(e.g. the profile of the most used device),
Messages
inbox
Upload pictures
in your phone
Send SMS
Send e-mail*
Send faxes
Manage your phonebook
menu of your phone, and will allow you to switch
Call your correspondents
Change
it or
Delete
Use GPRS Wizzard
to manage GPRS
connections
Synchronize your
mobile and PC
phonebooks and
organisers, backup
and restore
Bluetooth
features
Advertisement
Table of Contents
