Correcting The Image Shape With The Horizontal Keystone Slider - Epson EB-2265U User Manual

Image Shape
• If the yellow frame is still within the screen frame after
a
zooming in all the way, move the projector farther away from
the screen.
• For example, when you project onto a wide screen in a small
room and you cannot extend the yellow frame beyond the
screen frame, the yellow frame must include at least the top
and bottom two sides of the screen so that Screen Fit detects
the screen height and adjusts the image to fit the screen.
e
Press the [Screen Fit] button again.
After the adjustment screen appears, do not move the projector or
block the image. The projected image is corrected according to the
aspect ratio of the image being input and this message appears.
f
Fine-tune the image shape as necessary using the keystone adjustment
buttons on the control panel.
If no operations are performed, the message closes after about 7
seconds.
g
When you are finished, press [Esc].
The Keystone setting is now set to Quick Corner in the projector's Settings
menu. If necessary, you can correct the image corners individually using
Quick Corner by pressing the arrow buttons on the control panel.
g g Related Links
• "Projector Feature Settings - Settings Menu" p.145
• "Correcting the Image Shape with Quick Corner"
Correcting the Image Shape with the Horizontal
Keystone Slider
You can use the projector's horizontal keystone slider to correct the shape of
an image that is an uneven horizontal rectangle, such as when the projector is
placed to the side of the projection area (EB-2140W/EB-2040).
You can make effective corrections when the projection angle is about 30º
right or left.
a
Turn on the projector and display an image.
b
Adjust the slider until the image is an even rectangle.
After correction, your image is slightly smaller.
• When you use the horizontal keystone slider, set H-Keystone
a
Adjuster to On in the projector's Settings menu.
s Settings > Keystone > H/V-Keystone > H-Keystone
Adjuster
• You can also correct the shape of the image in the horizontal
direction in the projector's Settings menu.
s Settings > Keystone > H/V-Keystone
g g Related Links
• "Projector Feature Settings - Settings Menu"
49
p.51
p.145