Advertisement
GENERAL SECURITY DIRECTIONS
- Always read the installation manual before operating
- Keep the installation manual nearby in case you have to look something up
- Make sure that all electrical - and amplifier cables are fixed and connected BEFORE running
A BLACKOUT THROUGH JAMMED POWER CABLES MUST BE IMPOSSIBLE
- Never remove power cables by pulling
- ALWAYS remove the main fuse while working on the power cables
- NEVER use switches on the amplifier while it is working
- NEVER connect loudspeakers while the amplifier is working
- NEVER disconnect a loudspeaker while the amplifier is working
- Never operate the amplifier without loudspeakers connected
- Beware of flammable materials near the amplifier
- Make sure the amplifier is always well vented
- Make sure the cable cross-sections are equal at plus- and minus cables
For every plus cable connected to the battery an EQUALLY STRONG minus cable has
to be carried from the battery to the trim (or directly to the amplifier)
- Never mount the amplifier with the labeled side down
- Never mount the amplifier where it can be exposed to direct sun or moisture
- MOUNT POWER CABLES SECURELY . Abrasion protection should be used when cables are
carried through. SHORTS CAUSE DANGER OF FIRE!
- Never mount power cables along or over metal lines
- Never bypass the loudspeaker cables with the autobody or against each other
- AVOID physical contact with the amplifier as this might cause burns. Also true for animals
- Use a slightly damp tissue to clean the amplifier only
3
Advertisement
