BMW X5 M Owner's Manual page 153

Hide thumbs Also See for X5 M:
Table of Contents

Advertisement

If a maximum number of parking attempts
or the time taken for parking is exceeded.
When switching to another function on the
Control Display.
When the button is released.
If the tailgate is open.
If doors are open.
When setting the parking brake.
During acceleration.
When braking.
When unfastening the driver's safety belt.
A Check Control message is displayed.
Flashing display on the selector lever
The actually engaged transmission position
can deviate from the selector lever position in
some situations after function interruption.
The display in the selector lever flashes.
Observe the display in the instrument cluster,
refer to page 80, in these cases.
Resume
An interrupted parking procedure can be con‐
tinued if needed.
Follow the instructions on the Control Display
to do this.
System limits
No parking assistance
The parking assistant does not offer assis‐
tance in the following situations:
In tight curves.
Functional limitations
The system may not be fully functional in the
following situations:
On bumpy road surfaces such as gravel
roads.
On slippery ground.
On steep uphill or downhill grades.
Online Edition for Part no. 01 40 2 956 993 - X/14
Driving comfort
With accumulations of leaves/snow in the
parking space.
Limits of ultrasonic measurement
Ultrasonic measuring might not function under
the following circumstances:
For small children and animals.
For persons with certain clothing, e.g.
coats.
With external interference of the ultra‐
sound, e.g. from passing vehicles or loud
machines.
When sensors are dirty, iced over, dam‐
aged or out of position.
Under certain weather conditions such as
high relative humidity, rain, snowfall, ex‐
treme heat or strong wind.
With tow bars and trailer couplings of other
vehicles.
With thin or wedge-shaped objects.
With moving objects.
With elevated, protruding objects such as
ledges or cargo.
With objects with corners and sharp edges.
With objects with a fine surface structure
such as fences.
For objects with porous surfaces.
Low objects already displayed, e.g., curbs, can
move into the blind area of the sensors before
or after a continuous tone sounds.
The parking assistant may identify parking
spaces that are not suitable for parking.
Malfunction
A Check Control message is displayed.
The parking assistant failed. Have the system
checked.
Controls
149

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

X6 m

Table of Contents