Lcd Display; Microphone Controls - Midland MXT115 Owner's Manual

Microphone Controls

1. Channel Up
2. Channel Down
Rear Panel Connections
1. ANT Jack - SO-239 UHF connector for external antenna (included)
2. EXT SPKR Jack - 3.5mm Audio connector for optional external speaker
(purchased separately) (see Using an External Speaker for
specifications).
3. 13.8V DC Cable - 2-wire DC connector for 12V DC nominal input power
connection
Page 10
Model MXT115
EXT SP
ANT
midlandusa.com

LCD Display

12
1. Transmitting Icon - Indicates the radio is transmitting to another
user.
2. Monitor Icon - Indicates when the radio is in monitor mode
3. Channel Icon - Shows the selected transmit/receive channel.
4. Key Lock Icon - Indicates KEY LOCK mode is on
5. NOAA Weather Band Icon - Indicates when the radio is in the
Weather Band mode
DCS Icon - Indicates a Digitally Coded Squelch Privacy Code has
6.
been enabled for the currently selected channel
Scanning Icon - Indicates the "auto-scan" function is active.
7.
Repeater Icon - Shows the selected transmit/recieve repeater
8.
channel
CTCSS Icon - Indicates a Continuous Tone Coded Squelch System
9.
Code has been enabled for the currently selected channel.
10. Signal Strength - Indicates the strength of the current transmit or
receive signal.
11. Transmit Power Level Icon - Indicates the transmit power setting
12. Recieving Icon - Indicates the radio is recieving a transmission
from another user.
midlandusa.com
Model MXT115
Page 11