Stand Alone Test; Introduction; Setting Method - LG -T370 Service Manual

11. STAND ALONE TEST

10.1 Introduction

11.1
This manual explains how to examine the status of RX and TX of the model. This man al e plains ho to e amine the stat s of RX and TX of the model
A. Tx Test
TX test - this is to see if the transmitter of the phones is activating normally.
B. Rx Test
RX test - this is to see if the receiver of the phones is activating normally.

11.2 Setting Method

10.2 Setting Method
1. Set COM Port
2. Check PC Bau Rate 2 Check PC Bau Rate
3. Confirm EEPROM & Delta file prefix name
4. Click "Update Info" for communicating Phone and Test-Program
LGE Internal Use Only
10. STAND ALONE TEST
- 13 - Copyright © 011 LG Electronics. Inc. All right reserved.
11. STAND ALONE TEST
Only for training and service purposes