Internal Recording; Selecting The Recording Speed; Recording A Single Track; Recording An Entire Cd - Philips CDR820/17 User Manual

xp CDR 820/17 eng. 30-08-2001 10:43

Selecting the recording speed

1 Press SPEED several times to select the required recording
speed: 1x (normal speed), 2x (double speed) or 4x (4 times
normal speed).
Notes:
If recording is not successfull, you may need to select a lower
speed.
The recording speed cannot be changed during recording.

Recording a single track

Recording a single track during playback
1 Make sure the CDR(W) is absolutely free of scratches and
dust particles and insert it into the CD recorder tray.
2 Play your desired track on the CD changer.
3 Press RECORD on the set to enter the recording menu.
and the tracknumber are displayed.
4 Press either:
YES to start recording,
The arrow lights,
playback and recording start from the beginning of the
selected track and the actual recording time left starts to
count down.
or
NO to continue playback.
Do not forget to finalize!
Pagina 21
is shown,
RECORD IN PROGRESS

Internal recording

Recording an entire CD

High speed recording and automatic finalizing of
the current disc
1 Make sure the CDR(W) is absolutely free of scratches and
dust particles and insert it into the CD recorder tray.
2 Select the required disc by pressing CD1, CD2 or CD3.
3 Press COPY CD to enter into the record mode.
The arrow and the YES key start blinking.The remaining
recording time of the CDR(W), the total playing time of
the source CD and
displayed.
4 Press YES to start recording and finalizing.
The arrow lights,
RECORD IN PROGRESS
are shown, high speed recording and finalizing start and
the actual recording time left starts to count down.
Note: If a program was already available before pressing
COPY CD, this will be ignored.
current disc will be recorded. After finishing the recording,
is shown and the program is available again.
PROGRAM
Do not forget to finalize!
(or , ) are
and
FINALIZE
goes off and the
PROGRAM
21