Loading Discs; Playing - Philips CDR820/17 User Manual

xp CDR 820/17 eng. 30-08-2001 10:43

Loading discs

Loading discs
Important!
1) This set is designed for regular CD(RW)s.
Therefore, do not use any accessories such as disc
stabilizer rings or CD treatment sheets, etc. as offered
on the market, because they may cause jamming of
the changer mechanism.
2) Do not load more than one disc into one tray.
1 CD changer: Press OPEN/CLOSE / to open the disc
compartment.
CD recorder: Press OPEN/CLOSE / to open the disc
tray.
lights up.
Note: Opening the changer disc compartment or recorder disc
tray will clear any program present.
2 CD changer: Insert CDs in the two outer disc trays, label
side up.
To insert a third disc press CD CHANGE.
0
The CD carousel tray will rotate once.
CD recorder: Insert a disc in the tray, label side up.
3 CD changer: Press OPEN/CLOSE / again or gently push
the compartment to close it.
is displayed.
The display will show
selected tray, its number of tracks and total playing time.
CD recorder: Press OPEN/CLOSE / again or gently push
the tray to close it.
is displayed.
If an unfinalized disc is inserted,
displayed.
The display will show the type of disc inserted, its
number of tracks and the total playing time of the disc.
16
Pagina 16
lights up.
, the number of the the last
CD
MP3 discs only:
is displayed and
The first track name of the current album is displayed.
Changing discs during play (on CD changer only)
1 Press OPEN/CLOSE to open the disc compartment.
2 The CDs in the two outer disc trays can be changed while
play or recording continues.

Playing

1 Press CDR, CD 1, 2 or 3 to select the required disc.
2 Press PLAY/PAUSE 2/; to start play.
,
and elapsed playing time are displayed.
Press DISPLAY repeatedly to display:
0
track number, remaining playing time of current track
track number, remaining playing time of disc
track number, actual playing time of current track
for MP3 discs, pressing DISPLAY will display album
number, track number and track name.
3 To stop play, press STOP 9.
, , or , the number of tracks and the total
playing time of the disc appear on the display.
When an MP3 disc was playing, the first track name of
the current album is displayed.
To interrupt play temporarily, press PLAY/PAUSE 2/;.
0
The time where playback is interrupted is blinking.
To continue play, press PLAY/PAUSE 2/; again.
0
is
Playing
3 lights up.
MP
lights up.
, or , the number of the current track