Bosch GSR 1000 Original Instructions Manual page 23

OBJ_BUCH-2423-002.book Page 23 Tuesday, August 11, 2015 9:55 AM
 Maintain power tools. Check for misalignment or binding of moving parts,
breakage of parts and any other condition that may affect the power tool's op-
eration. If damaged, have the power tool repaired before use. Many accidents
are caused by poorly maintained power tools.
 Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp
cutting edges are less likely to bind and are easier to control.
 Use the power tool, accessories and tool bits etc. in accordance with these in-
structions, taking into account the working conditions and the work to be per-
formed. Use of the power tool for operations different from those intended could
result in a hazardous situation.
Battery tool use and care
 Recharge only with the charger specified by the manufacturer. A charger that
is suitable for one type of battery pack may create a risk of fire when used with an-
other battery pack.
 Use power tools only with specifically designated battery packs. Use of any
other battery packs may create a risk of injury and fire.
 When battery pack is not in use, keep it away from other metal objects, like
paper clips, coins, keys, nails, screws or other small metal objects, that can
make a connection from one terminal to another. Shorting the battery terminals
together may cause burns or a fire.
 Under abusive conditions, liquid may be ejected from the battery; avoid con-
tact. If contact accidentally occurs, flush with water. If liquid contacts eyes,
additionally seek medical help. Liquid ejected from the battery may cause irrita-
tion or burns.
Service
 Have your power tool serviced by a qualified repair person using only identi-
cal replacement parts. This will ensure that the safety of the power tool is main-
tained.
Safety Warnings for Drills and Screwdrivers
 Hold power tool by insulated gripping surfaces when performing an operation
where the cutting accessory or fastener may contact hidden wiring. Cutting
accessory and fasteners contacting a "live" wire may make exposed metal parts of
the power tool "live" and could give the operator an electric shock.
 Use auxiliary handle(s), if supplied with the tool. Loss of control can cause per-
sonal injury.
Bosch Power Tools
English | 23
1 609 92A 1F9 | (11.8.15)