Suzuki Alto800 Manual page 113

53M-07-064
• CDs or CD-ROM carrying no mark (A)
cannot be used.
• Some discs recorded in CD-R/CD-RW
format may sometimes be impossible to
use.
53M-07-065
• A CD is to be inserted with its label side
up.
• When there is a CD already in the unit, it
is impossible to insert another CD with-
out ejecting the CD in the unit. Do not
use force to insert a CD into the CD
insertion slot.
CAUTION
• Never insert your finger or hand
into the CD insertion slot. Never
insert foreign objects.
• Never insert a CD with glue coming
out from adhesive tape or a rental
CD label or with a trace indicating
that adhesive tape or a rental CD
label has been removed. This may
cause the CD not to eject or result
in a malfunction.
Loading a CD
Insert a CD in the Insertion slot (2). With
the printed side up.
When a CD is loaded, play starts.
Ejecting a CD
Press the Eject button (1). (After ejecting,
the unit returns to the Radio mode.)
CAUTION
If you forcefully try to push an
ejected CD inside the unit before auto
reloading, the disc surface might be
scratched.
• When reloading a CD, remove it
from the unit completely before
reloading.
OTHER CONTROLS AND EQUIPMENT
NOTE:
• If a disc is inserted after the previous
disc is removed from the unit, the unit
starts playback from the beginning of the
first track.
• If you turn OFF the ACC and within few
second so of turning ON the ACC, the
unit starts playback from the position
from where it has accepted.
• If you press the EJECT button, and
leave the disc for roughly 15 seconds,
the disc is automatically reinserted into
the unit to protect the disc. In this case,
the unit doesn't start playback automati-
cally.
Selecting a CD mode
Press the Media Source Mode button (3).
Each time the button is pressed, the mode
will change as follows.
53M-07066
5-20
53MH0-74E