Sony WEGA KE-MV42A1 Operating Instructions Manual page 3

Ventilation
Leave space around the Plasma TV. Otherwise, adequate air-
circulation may be blocked causing overheating and cause
fire or damage the Plasma TV.
When installing the Plasma TV on the wall
30cm
10cm
10cm
Never install the Plasma TV as follows:
Air circulation is blocked.
When installing the Plasma TV using a stand
30cm
10cm
10cm
Leave this space at least.
Wall
10cm
Leave this space at least.
Never install the Plasma TV as follows:
Air circulation is blocked.
Power Sources
Overloading
This Plasma TV is designed to
operate on a 110-240V AC
supply for the Plasma TV.
Take care not to connect too
many appliances to the same
AC power socket as this could
result in fire or electric shock.
AC power outlet
Do not use a poor fitting AC power socket.
Insert the plug fully into the AC power outlet.
If it is loose, it may cause arcing and result in
fire. Contact your electrician to have the AC
power socket changed.
When you disconnect the AC power cord,
disconnect it from the AC outlet first.
Moisture
Do not touch the AC power cord with a wet
hand. If you plug/unplug the AC power
cord with a wet hand, it may cause electric
shock.
Lightning storms
For your own safety, do not
touch any part of the Plasma TV,
AC power cord or antenna lead
during lightning storms.
AC power cord protection
Pull out the AC power cord by
the plug. Do not pull on the AC
power cord itself.
Wall
3