Installing On The Din Rail - Siemens SCALANCE M874-2 Operating Instructions Manual

Installation

2.3 Installing on the DIN rail

2.3 Installing on the DIN rail
Requirement
There is a SIM card for the device.
Installation
1. Insert the SIM card, see section "SIM card (Page 33)".
2. Place the third housing guide of the device on the top edge of the DIN rail
3. Press the device down against the DIN rail until the spring catch locks in place
4. Connect the power supply, refer to the section "Power supply (Page 34)".
5. Fit the connectors for the digital input and digital output, refer to the section "Digital
input/output (Page 37)".
6. Connect the antenna, refer to the section "Antennas (Page 39)".
7. Connect the device to the local network, refer to the section "Ethernet port (Page 42)".
Dismantling
1. Disconnect all connected cables.
2. Using a screwdriver, pull down the catch on the rear of the device.
3. Pull lower part of the device away from the DIN rail.
26
Operating Instructions, 07/2014, C79000-G89760-C331-03
①
.
②
.
SCALANCE M874, M876