Tuning into a station manually
Press FUNCTION button until the frequency
1.
band appears on the display.
Press the BAND button to select the desired
2.
band.
3.
Press the
TUNING
the desired station.
FM Stereo
Press the FM MODE button on the remote
until "
" appears on the display.
Weak FM stations
Press the FM MODE button on the remote
until the "
" word appears on the display.
Background noise will be reduced but the signal
reproduced will be mono. To restore stereo
reception, press the FM MODE button on the
remote to select STEREO.
To search for a station automatically
TUNING
Hold down the
panel for 1 to 2 seconds, and a station is searched for automatically. After tuning in a station,
the search stops.
The search may not stop at a station with a very weak signal.
Presetting stations
You can tune into a stored station directly by entering the preset number.
20 stations on FM band can be preset.
20 stations on AM(MW) band can be preset.
Press FUNCTION button until the frequency band appears on the display.
1.
Press the BAND button to select the desired band.
2.
3.
Press the
PLAY (PRESET) button or number button to select the preset number.
4.
Use the
TUNING
Press the MEMORY button twice on the remote.
5.
6.
Repeat steps 2-5 to store other stations
Tuning into a preset station
Press FUNCTION button until the frequency band appears on the display.
1.
2.
Press the BAND button to select the desired band.
Press the
PLAY (PRESET) button to select the presetted station or use the numbered buttons
to enter the number to select the presetted station.
Example:
To select preset number 15, press the +10 and 5 buttons.
To select preset number 10, press the +10 and 0 buttons.
RADIO OPERATION
button to tune in
buttons on the remote or
button to find your desired station.
26
SKIP
buttons on the front