Connections; Speaker Connection; Am (Mw) Loop Antenna Connection; Fm Antenna Wire Connection - Audiovox MVS6950 Owner's Manual

1. Speaker connection

Connect the right speaker to the R terminals, and the left speaker to the L terminals.
Connect the wires with the printed white lines to the red (+) terminals and the plain-black
wires to the black (-) terminals.

2. AM (MW) loop antenna connection

Connect the loop antenna (included) to the AM (MW) LOOP ANTENNA terminal.

3. FM antenna wire connection

Connect FM antenna wire (included) to the FM ANTENNA terminals.

4. Power cord connection

Make sure that all the components and speakers are connected correctly.
Be sure the AC power cord is disconnected and all functions are off before making connections.
When you are not going to use the Unit for a long period of time, disconnect the power
cord.
Note:
Before using the unit, check that the rated voltage matches your local voltage.

CONNECTIONS

To wall outlet
12
AM (MW) Loop Antenna
(Included)
FM antenna wire
(Included)
(continued on next page)