Table of Contents
Advertisement
Honeywell
HWLKS-C-M-1918
Important Safety Instructions
1.
Install and use this system after reading these instruction thoroughly.
2.
Keep these instructions.
3.
Install in accordance with the manufacture's instruction.
4.
Take care of all Cautions and Warnings.
5.
Use stainless steel hardware to fasten the mount to outdoor surfaces.
6.
A readily accessible disconnect device shall be incorporated in the building installation
wiring.
7.
Only use replacement parts recommended by Honeywell.
8.
The maximum ambient temperature range is -20℃ to 50℃.
Explanation of Graphical Symbols.
This symbol is intended to alert the user to the presence of uninsulated
"dangerous voltage" within the product's enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to persons.
This symbol is intended to alert the user to the presence of important
operating and maintenance(Servicing) Instructions in the literature
accompanying the appliance.
WARNING:
the equipment from the supply circuit before opening.
WARNING:
must have a sealing fitting connected within 3/4 inches of the enclosure.
TO REDUCE THE RISK OF IGNITION DO NOT OPEN WHEN AN EXPLOSIVE
GAS ATMOSPHERE MAY BE PRESENT
RISK OF ELECTRIC SHOCK
To reduce the risk of ignition of Hazardous Atmospheres, disconnect
To reduce the risk of ignition of hazardous atmospheres, conduit runs
CAUTION
DO NOT OPEN
CAUTION
TO REDUCE THE RISK OF ELECTRIC SHOCK.
:
DO NOT REMOVE COVER(OR BACK).
NO USER SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE PRERSONNEL
- 3 -
Advertisement
Table of Contents
