Tone Squelch And Pocket Beep; Tone/Dtcs Squelch And Pocket Beep - Icom ic-80fx Instruction Manual

6

TONE SQUELCH AND POCKET BEEP

■ Tone/DTCS squelch and pocket beep

D Tone squelch and DTCS squelch
The tone squelch (CTCSS) or DTCS squelch opens only when
receiving a signal that includes a matching CTCSS tone or
DTCS code, respectively. You can silently wait for calls using
the same tone or code. Separate tone frequencies can be set
for the Subaudible tone encoder (" ") and tone squelch (" ")/
pocket beep (" ") operation.
D Pocket beep
The Pocket Beep function uses subaudible tones or DTCS codes
for calling, and can be used as a "common pager" to inform you
that someone has called while you were away from the transceiver.
• Recommended CTCSS tones
67.0 79.7 94.8
69.3 82.5 97.4
71.9 85.4 100.0
74.4 88.5 103.5
77.0 91.5 107.2
• Recommended DTCS code
023 051 114 143
025 054 115 152
026 065 116 155
156
031 071 125
032 072 131 162
043 073 132 165
047 074 134 172
21
(unit: Hz)
110.9 131.8 156.7 186.2
114.8 136.5 162.2 192.8
118.8 141.3 167.9 203.5
123.0 146.2 173.8 210.7
127.3 151.4 179.9 218.1
174 251 315 371 445 532
205 261 331 411 464 546
565
223 263 343 412 465
226 265 346 413 466 606
243 271 351 423 503 612
244 306 364 431 506 624
627
245 311 365 432 516
D Setting CTCSS tone or DTCS code
q Push [FUNC](M), and then [SET](8) to enter the Set mode.
w Push [
the DTCS code item (dt).
• " " blinks when selecting the CTCSS tone item, and "
when selecting the DTCS code item.
e Rotate [VOL] to select a CTCSS tone or DTCS code.
• The recommended CTCSS tones or DTCS codes are shown to
the left.
r Push [# ENT](MN.W) to exit the Set mode.
225.7
233.6
241.8
250.3
631 723
632 731
654 732
662 734
664 743
703 754
712
] or [ ] to select the CTCSS tone item (Ct) or
CTCSS tone setting
[VOL]
DTCS code setting
" blinks
D