Renault CLIO Driver's Handbook Manual page 132

CRUISE CONTROL - SPEED LIMITER: cruise control function
2 3 4
Putting the function on
standby
The function is interrupted when you:
– switch 4 (O);
– the brake pedal;
– the clutch pedal or shift into neutral
if the vehicle has an automatic gear-
box.
In all three cases, the cruising speed is
stored.
2.34
Recalling the cruising speed
If a speed has been stored, it is possi-
ble to recall it by pressing switch 5 (R),
on condition that you are driving faster
than 20 mph (30 km/h) and that you
are sure that the driving conditions are
5 suitable (traffic, road surface condition,
weather conditions, etc.).
Pressing switches 2 (+) or 3 (-) re-
activates the cruise control func-
tion without taking into account the
memorised speed: it is the speed at
which the vehicle is moving that is
taken into account.
(continued)
1
Switching off the function
Press switch 1. If you do this, the speed
is not memorised.
Confirmation that the function has been
switched off is given when the indicator
light on the instrument panel goes out.
Putting the cruise control
on standby or switching it
off does not cause a rapid
reduction in speed: you
must brake by depressing the brake
pedal.