D-Link DSL-2870b User Manual page 149

D-Link DSL-2870B Dual Band Wireless N750 Gigabit ADSL2+ Modem Router User Manual
After clicking the Add New Connection button, the following page is available.
In this section, the following parameters can be configured:
IPSec Connection Name: Enter the IPSec tunnel connection name here.
Tunnel Mode: Select the tunnel mode option here. Options to choose from are ESP
and AH.
Remote IPSec Gateway Address (IPv4 address in dotted decimal): Enter the
remote IPSec gateway address used here.
Tunnel access from local IP addresses: Select the local tunnel access option
here. Options to choose from are Subnet and Single Address.
IP Address for VPN: Enter the local IP address for the VPN here.
IP Subnetmask: Enter the local IP subnet mask for the VPN here. Notice that this
option will not be available if Single Address was selected above.
Tunnel access from remote IP addresses: Select the remote tunnel access
option here. Options to choose from are Subnet and Single Address.
Web User Interface Configuration Page 149